a3ts Congress 2018 - bordeaux

Opening of the Congress by Pierre BRUCHET, A3TS President.

Challenges and impacts of powertrain electrification: an ecosystem vision.
Gildas BUREAU (Powertrain and Chassis Department, Master Expert in Materials and Mechanical Processes, PSA Group).

Distortion of Heat Treated Components - Basics and Examples for Reduction.
Dr.- Ing. Thomas LÜBBEN (Head of the working group Quenching Technology and Simulation IWT - BREME Germany).

High Nitrogen" carbonitriding of steels for the automotive and aeronautical industries.
Alexandre FLEURENTIN (METALLO CORNER), Thilo PIRLING (ILL).

An original technique for characterizing thermochemical treatments: the Castaing electron microprobe.
Philippe VOLCKAERT (BUREAU VERITAS LABORATORIES).

Replacement of Chromium coatings by controlled nitrocarburizing.
Jack KALUCKI (NITREX).

Microstructure and Properties of Inconel 740H Nickel Alloy After Plasma Nitriding Process.
Jaroslaw MIZERA, Ryszard SITEK (WARSAW POYLTECHNIC SCHOOL).

Architecture of the AFTER ALM project.
Joffrey TARDELLI (IRT M2P).

Electropolishing solutions on materials from additive manufacturing.
Chloé ROTTY (UTINAM), Estelle DRYNSKI (IRT M2P).

Original method of optimization of post-fabrication treatments based on a thermo-mechanical approach.
Jordan RIGAUD (LIEBHERR AEROSPACE).

Focus on electrolytic plasma polishing.
Anthony SPICA (IRT-M2P)

Study of the influence of the type of heat treatment on the deformation of folded flat products.
Marc BUVRON (CETIM).

Contribution of simulation for the deformation of aeronautical parts.
Khalil TRAIDI (SAFRAN).

Low-pressure carburization of mass-produced differential parts: impact of the choice of hardening media on metallurgy and deformation.
Vincent LELONG (Synergy Center ECM USA).

Means of in situ measurements - Real time 3D visualization of deformations.
Rémi GILBLAS (ECOLE DES MINES D'ALBI), Pascal LAMESLE (IRT M2P).

Deformation control for steels intended for heat treatment.
Jean-Michel JACHMICH (ArcelorMittal), Marc COURTEAUX (PSA Group).

Cooling in salt baths after heat treatment under controlled atmospheres in a bell furnace.
Philippe WARTER (CODERE).

Influence of nitrogen on the functional properties of martensitic stainless steels.
Pierre REILHAC (IRT - M2P).

Which coatings on stainless steel and innovative alternative solutions for high tensile steel.
Dr. Martin WELP (DOERKEN).

Powder tribometallurgy: metal-diamond composite tools with high abrasive performance.
Adrien MAGNEE (ULG - DIAROTECH), J.M. RENOIRD, E. LAMINE (DIAROTECH).

Anti-wear laser cladding of stainless steels. Industrial applications.
Didier DEZERT (TECHNOGENIA).

Duplex treatment of an AISI 316LM steel: micro-structuring of the surface by ion etching followed by plasma assisted nitriding. Influence of the treatment parameters on the tribological properties.
Anastasiia PAVLIK (IJL - LEM3 - University of Lorraine).

Tetrahedral amorphous carbon (taC): an evolution of Diamond Like Carbon (DLC) for applications under extreme stress.
Anthony CHAVANNE (HEF Group).

ta-C (tetrahedral amorphous carbon) coatings for automotive applications.
Astrid GIES (OERLIKON AG).

State of the art of maraging stainless steels.
Atman BENBAHMED (AUBERT & DUVAL).

Development of efficient natural gas solutions in industry: characterization by GRDF of the Noxmat self-recovery burner.
Cyril CROCGAILLARD (GRDF).

Different approaches to energy optimization related to heat treatment.
Ludovic FERRANT, Ludovic LAURIOUX-LECOMTE, Jean Christophe MITAIS (CMI INDUSTRY).

Different improvement levers, industrial applications to drawn tubes at Mannesmann Precision Tubes.
Pierre-Jean MARCHAIS (MANNESMANN PRECISION TUBES).

Energy efficiency in heat treatment plants: current situation and potential for improvement.
Daniel ZIMMERMANN (AICHELIN Group).

Replacing hard Cr for some land armament applications - Progress report.
Gilles CHOLVY (NEXTER Group).

State of the art of regulations and impact on the various surface technology professions (dry process, wet process, paint...) perspectives and prospects.
Anne-Sophie MAZE (UITS).

Choice of the degassing time on carbonitrided and galvanized parts. Importance of Hsurface / Hcore and hydrogen distribution...
Alexandre FLEURENTIN (METALLO CORNER).

New anodizing and deanodizing solutions for aeronautical applications.
Benjamin MOULS (INEOSURF).

Development of a multifunctional coating for water erosion, corrosion resistance and aeronautical aesthetic requirements of aluminium air inlet lips by micro-arcs oxidation.
Julien ESCOBAR (IRT St.-EXUPERY).