Plenary conferences

• 12/03/2025

Opening of the Congress and Presentation of the "SAFE CLUSTER" Hub

Véronique VITRY (President of A3TS) and André SOULAGE (SAFE CLUSTER)

Plenary conferences

• 12/03/2025

Changes in the scope of mechanical parts in the era of electrification of powertrains

Gildas BUREAU - Senior Materials Engineering Expert - STELLANTIS

Plenary conferences

• 12/03/2025

Certification of surface treatments compliant with REACH regulations in the aerospace industry

Olivier MOLINAS - Senior Expert - Metallic Materials and Processes - AIRBUS HELICOPTERS

Plenary conferences

• 12/03/2025

Models and data, physics and artificial intelligence, serving surface engineering

Francisco CHINESTA - Lecturer and researcher in engineering at the PIMM Laboratory (Processes and Engineering in Mechanics and Materials) - CNRS/CNAM/Arts et Métiers Institute of Technology

Thermal and thermochemical treatments

• 12/03/2025

Combination of a nanobainite microstructure and secondary hardening by carbide precipitation for high-temperature applications

Steve GAUDEZ - JEAN LAMOUR INSTITUTE

Thermal and thermochemical treatments

• 12/03/2025

Cross-testing by the A3TS Fluids & Quenching Processes Commission - Verification of the repeatability and reproducibility of the drasticity test in accordance with ISO 9950:1995

Eric FRADE (THERMO PROCESS), Victor GUILLER (FUCHS LUBRIFIANT FRANCE SA)

Thermal and thermochemical treatments

• 12/03/2025

Digital Tools: Application to Fluo-Turning

François FRASCATI, Agathe DEMAY (MBDA France)

Corrosion protection based on ZN and ZN alloy

• 12/03/2025

Corrosion behavior of lamellar zinc coatings on structural components and fasteners for offshore equipment

Benoit MILLET (NOF METAL COATINGS EUROPE)

Corrosion protection based on ZN and ZN alloy

• 12/03/2025

Lamellar zinc-based solutions for corrosion protection

Guy DECELLES ( NOF METAL COATINGS EUROPE)

Thermal and thermochemical treatments

• 12/03/2025

Study of the formation of polycyclic aromatic hydrocarbons (PAHs) during the pyrolysis of acetylene in low-pressure gas carburizing. Evaluation, Experiments, Modeling

Hubert MONNIER (INRS)

Thermal and thermochemical treatments

• 12/03/2025

Reduction of PAHs and soot in low-pressure gas carburizing. Modeling, simulations, and cycle optimization.

Fatima MATAMOROS MARIN (LRGC CNRS University of Lorraine)

Thermal and thermochemical treatments

• 12/03/2025

Induction stress relief of electron beam welded parts

Alexandre BONNIN (AIRBUS HELICOPTERS)

Hydrogen control in surface treatments

• 12/03/2025

Influence of hydrogen from the electrodeposition of trivalent chromium on the mechanical properties of the coated part

Walid BEDJOU ( IRT M2P - LaSIE)

Industry 4.0 in surface treatments

• 12/03/2025

Industry 4.0 in surface technology workshops

Anne-Sophie MAZE - Thibault JEUNE (UITS)

Industry 4.0 in surface treatments

• 12/03/2025

Supervision, control, and traceability of surface treatment lines

Thierry BATAILLE (CMI SLETI John Cockerill Group)

Carbon footprint and energy management in heat treatments

• 12/03/2025

Future energy challenges for heat treatment in the face of global warming

Valérie WOIMBEE (FAURECIA AUTOMOTIVE SEATING)

Carbon footprint and energy management in heat treatments

• 12/03/2025

Reducing greenhouse gas emissions: what role can specialty steels play?

Thomas SOURMAIL (ASCOMETAL)

Carbon footprint and energy management in heat treatments

• 12/03/2025

Technological transition: from the use of belt furnaces to clean, automated production

Patrick POULOUX (ECM Technologies)

Hydrogen control in surface treatments

• 12/03/2025

Zinc and zinc iron under pulsed currents for yield control

Jeanne Marie RAUCH (IRT M2P - UTINAM)

Hydrogen control in surface treatments

• 12/03/2025

Hydrogen sensitivity of a Zn-Fe electrolytic process with high iron content

Romain LEBARBENCHON (LaSIE - La Rochelle University)

Hydrogen control in surface treatments

• 12/03/2025

Anodizing treatment or mechanical treatments: comparative study of the impact on the hydriding resistance of Ti alloys

Virginie LEPEMANGOY, Virginie MOUTARLIER (UTINAM)

Optimization of contact through coatings

• 12/03/2025

Influence of surface treatment on friction generated by gear teeth

Nicolas GRENET DE BECHILLON (INSA Lyon)

Optimization of contact through coatings

• 12/03/2025

Mo-S-N: presentation and applications of a new solid lubricant for dry environments

Kaushik HEBBAR KANNUR - Guillaume CHEVRET (IREIS HEF group)

Optimization of contact through coatings

• 12/03/2025

Development of new PVD coatings for transmissions

Alexandre BONNIN (AIRBUS HELICOPTERS), Mathilde MILLOT ( SAFRAN POWER TRANSMISSIONS), Fanny DELOYE (IRT M2P), Thibault MAERTEN (OERLIKON SURFACE SOLUTIONS)

Optimization of contact through coatings

• 12/03/2025

Influence of different heat and thermochemical treatments of 42CrMo4 steel on tribological response

Eymard Houara Komba (Faurecia)

Corrosion protection based on ZN and ZN alloy

• 12/03/2025

Corrosion behavior in saline environments of a high-iron Zn-Fe electrolytic process

Lucas BAISSAC (LaSIE La Rochelle University)

Corrosion protection based on ZN and ZN alloy

• 12/03/2025

The evolution of passivation on zinc alloys since the end of Cr VI

Frédéric RAULIN ( COVENTYA)

Corrosion protection based on ZN and ZN alloy

• 12/03/2025

The new era of electric mobility: Reliable electrical connections for high- and low-current applications

Dr. Andreas SMIE, Yann GEVAUDAN (MacDERMID ENTHONE)

Sensors for use in the digital factory

• 12/03/2025

New Possibilities for Detecting Tempering Defects Using Induction Thermography.

Richard HUILLERY (THERMOCONCEPT)

Sensors for use in the digital factory

• 12/03/2025

Eddy current testing of heat-treated production parts.

Romain LABROYE SCHULTE ( QUALISCO)

Finishing parts produced using additive manufacturing

• 12/03/2025

Development of an electro-mechanical-chemical polishing technology - Application to parts produced using additive manufacturing

Joel RECH (ENISE)

Thermal and thermochemical treatments

• 12/03/2025

High-temperature nitriding of ferritic stainless steels

Stéphane CHOMER (THERMI LYON)

Thermal and thermochemical treatments

• 12/03/2025

Experimental analysis and modeling of the deformation of 33CrMoV12-9 steel parts induced by gas nitriding.

Simon THIBAULT (NTN-SNR)

Thermal and thermochemical treatments

• 12/03/2025

Salt bath nitriding: a technology ready for the future.

Luc HERRMANN ( HEF)

Functional coatings

• 12/03/2025

Surface finish of connectors: improved properties by switching from gold to silver and silver-based alloys.

Anthony FRANCHINI (AMPHENOL ICC)

Functional coatings

• 12/03/2025

SPS sintering of iron-based powders: PVD coating, an innovative solution to prevent carbon buildup caused by contact with graphite foil.

Aurélien BESNARD (LABOMAP - ARTS ET MÉTIERS)

Finishing parts produced using additive manufacturing

• 12/03/2025

Simulation of electrochemical finishing of parts produced by additive manufacturing: a tool for industrialization.

Aurélien BOUCHER (SAFRAN TECH - UTINAM)

Find video recordings from the 2021 A3TS Congress in Marseille here.

Opening of the Congress and Presentation of the "SAFE CLUSTER" Hub

Changes in the scope of mechanical parts in the era of electrification of powertrains

Certification of surface treatments compliant with REACH regulations in the aerospace industry

Models and data, physics and artificial intelligence, serving surface engineering

Combination of a nanobainite microstructure and secondary hardening by carbide precipitation for high-temperature applications

Cross-testing by the A3TS Fluids & Quenching Processes Commission - Verification of the repeatability and reproducibility of the drasticity test in accordance with ISO 9950:1995

Digital Tools: Application to Fluo-Turning

Corrosion behavior of lamellar zinc coatings on structural components and fasteners for offshore equipment

Lamellar zinc-based solutions for corrosion protection

Study of the formation of polycyclic aromatic hydrocarbons (PAHs) during the pyrolysis of acetylene in low-pressure gas carburizing. Evaluation, Experiments, Modeling

Reduction of PAHs and soot in low-pressure gas carburizing. Modeling, simulations, and cycle optimization.

Induction stress relief of electron beam welded parts

Influence of hydrogen from the electrodeposition of trivalent chromium on the mechanical properties of the coated part

Industry 4.0 in surface technology workshops

Supervision, control, and traceability of surface treatment lines

Future energy challenges for heat treatment in the face of global warming

Reducing greenhouse gas emissions: what role can specialty steels play?

Technological transition: from the use of belt furnaces to clean, automated production

Zinc and zinc iron under pulsed currents for yield control

Hydrogen sensitivity of a Zn-Fe electrolytic process with high iron content

Anodizing treatment or mechanical treatments: comparative study of the impact on the hydriding resistance of Ti alloys

Influence of surface treatment on friction generated by gear teeth

Mo-S-N: presentation and applications of a new solid lubricant for dry environments

Development of new PVD coatings for transmissions

Influence of different heat and thermochemical treatments of 42CrMo4 steel on tribological response

Corrosion behavior in saline environments of a high-iron Zn-Fe electrolytic process

The evolution of passivation on zinc alloys since the end of Cr VI

The new era of electric mobility: Reliable electrical connections for high- and low-current applications

New Possibilities for Detecting Tempering Defects Using Induction Thermography.

Eddy current testing of heat-treated production parts.

Development of an electro-mechanical-chemical polishing technology - Application to parts produced using additive manufacturing

High-temperature nitriding of ferritic stainless steels

Experimental analysis and modeling of the deformation of 33CrMoV12-9 steel parts induced by gas nitriding.

Salt bath nitriding: a technology ready for the future.

Surface finish of connectors: improved properties by switching from gold to silver and silver-based alloys.

SPS sintering of iron-based powders: PVD coating, an innovative solution to prevent carbon buildup caused by contact with graphite foil.

Simulation of electrochemical finishing of parts produced by additive manufacturing: a tool for industrialization.

Quick Access

Legal pages