CS07B - Prevention of functional mechanical degradation of aluminum by surface treatments
Inter-company and intra-company courses
New
Educational objectives
To know the main modes of degradation under mechanical stresses that can affect aluminum alloys
To know the standards relating to the quantification of the behavior of aluminum alloys in mechanical stresses
To know the main treatments for improving the mechanical behaviour applicable to Aluminium alloys, including the relative standards, compliance with REACh and ROHS regulations and the complementary characteristics of the treatment for other functional uses
PROGRAM
1. The different modes of mechanical degradation in functional use and the associated quantities
Mechanical behavior under static and cyclic loads (fatigue)
Surface hardness
The mechanical behavior to impact (resilience)
Friction, roughness and seizure
Contact fatigue (fretting), abrasive and erosive wear
Stress corrosion
2. Quantifying mechanical behavior - Normative tests
Testing for static and impact failure
Measuring hardness
Evaluate the fatigue life
Measuring roughness and wear resistance
Quantify stress corrosion
3. Treatments to protect against wear in non-corrosive environments
Mechanical treatments
Classic conversions: Hard anodizing
Plasma conversions
Surface treatments by wet process: Chemical Nickel
Vacuum surface treatments (including DLC)
Vacuum surface treatments: PVD deposits (including DLC)
4. Treatments to improve friction
Classic conversions: Teflon-filled hard anodizing
Bonded coatings based on fluoropolymers
Other slip coatings (graphite, MoS2)
ADDITIONAL INFORMATION
To deepen your knowledge, we suggest you create a training course using other modules from the catalog.
CONTACT US
formation@a3ts.org
+33 (0)1 45 26 22 35
Accessible to people with reduced mobility: yes. Accessible to people with other disabilities: please contact our disability advisor on +33 (0)1 45 26 22 35 to discuss the situation together.
- DURATION
2days (14h)
- PUBLIC CONCERNED
Executive, Technician
- PREREQUISITES
Fundamentals of surface treatment or experience in TS.
- METHODS MOBILIZED
Courses and exercises on paper or digital support. Multiroom videoconference platform with chat.
- PLACE
Face-to-face INTER: A3TS Paris
Face-to-face INTRA: On site
Distance learning: Videoconferencing
- RATES
Face-to-face or distance learning :
- Inter : 1 260€ HT/pers.
- Intra : on quotation
- DEADLINES AND DATES
Find out in real time the dates and places available on our website: www.a3ts.org/catalogue-formations
Training open to a minimum of 4 participants.
- TRAINER
Expert engineer in surface treatments.
- EVALUATION METHODS
Satisfaction survey at the end of the session.
Evaluation of learning at the beginning and end of the training.