The Scientific and Technological Council

L’animation scientifique liée aux industries de traitements thermique et de traitements de surface est l’une des principales missions de l’A3TS. Elle passe par la diffusion d’informations sur différents supports (presse, internet) et par l’organisation de journées techniques et de congrès.

The Scientific and Technological Council ensures the quality of the information disseminated by the A3TS. Composed of about twenty members and animated by its President, the Scientific and Technological Council exercises a mission of proposal by generating ideas and by ensuring the renewal of the themes.
Representative of the diversity of the actors and the sectors, it claims a strong anchoring in the reality of the profession as well as in innovation through research.

It is the guarantor of the scientific quality of the information disseminated by the A3TS, and also has a mission of monitoring and control over the content of conferences and articles.

Composition of the Board:

Aurélie Achille (FORVIA) - Fabrice Antoine (ATOTECH) - Pierre Barrès (MECAPROTEC Industries) Vincent Branger (NAVAL GROUP) - Pierre Bruchet (A3TS) - Marc Buvron (CETIM) - Gilles Cholvy - Stéphane Chomer (T.L.D. THERMI LYON DEVELOPPEMENT) - Marc Courteaux (STELLANTIS) - Fernand DA COSTA (RENAULT) - Olivier DELCOURT (SAFRAN) - Sabine Denis (INSTITUT JEAN LAMOUR) - Alain Denoirjean (IRCER) - Frédéric DUHAMEL (THALES) - Isabelle Ecotière (SURTEC) - Alexandre Fleurentin (METALLO CORNER) - Pascal FROU - Jean-Yves Hihn (President of the Board - UNIVERSITE DE FRANCHE COMTE) - Philippe Jacquet (ECAM Lyon) - Patrick Jacquot (BODYCOTE)- Pascal Lamesle (IRT-M2P) - Frédéric Meunier (OERLIKON BALZERS France) - Virginie Moutarlier (UNIVERSITE DE FRANCHE COMTE) - Frédéric Raulin - Claude Rossignol - Maurice Sarfati (D.G.A.) - Christophe Stocky (ABS Centre Métallurgique) - Véronique Vitry (UNIVERSITY OF MONS).

Technical Commissions led by the Scientific Committee

The technical commissions are the "kingpins of the A3TS", they federate the skills of its members to promote the technical and technological developments of the moment.
Thus, within the framework of their work, the commissions contribute to making the capitalized knowledge available to the companies concerned. In addition, the expertise induced by this work in the field of heat treatment is widely disseminated to industries where these technologies are essential in the design and manufacture of products, components, mechanical equipment...

 

Generally the dissemination of the work of the commissions is carried out in four forms:

  • Writing articles in specialized magazines

  • Participation in technical days, seminars, conferences...

  • Realization of training courses specific to the field

  • Writing and publishing of specialized books

 Active commissions

TREMPLE FLUID Commission: facilitator Alexandre FLEURENTIN

The "quenching fluids and systems of today and tomorrow" committee, led by Alexandre FLEURENTIN (Métallo Corner), meets three times a year and brings together a wide range of industrial users and formulators of quenching fluids (gas, polymer, oils, salt baths). These days, rich in exchanges, are the right time to tackle the following projects:

Standardization of the "infrared" method to measure the ageing of a quenching oil: Led by Odile ALLEAUME (Fuchs), this working group's mission is to propose a draft standard to measure the level of oxidation and cracking of a quenching oil in service. Circular tests in about ten laboratories are underway to complete this project.

Control and design of gas, oil, water/polymer and salt quenching tanks: At each meeting, we decided to invite a manufacturer of industrial furnaces to discuss the safety and design of quenching installations. We would like to thank the companies we have already met (ECM, ALD, SECO WARWICK, PETROFER, SAFED to follow) for the constructive exchanges we have had on this subject.

Development of sensors for drasticimeters: A problem was raised within the working group regarding the availability of this type of sensor, which is produced "outside our borders" by only two suppliers. This configuration can be a source of problems in terms of supply. A sub-group was formed around Eric FRADET (Synergy Consult) in order to remedy this situation.

Update of the book of the 90s on "quenching fluids and systems": The members of the commission decided to update a book of the 90s on quenching fluids, it was time... We are currently working on different topics: standardization and specifications, oil quenching, polymer / water quenching, gas quenching, press quenching, salt bath quenching, cryogenic cooling, but also defects and remedies associated with the various technologies.

Approach of the strain dispersion in different quenching chambers: this new project aims at studying the impact of the quenching fluid but also of the dimensioning of the quenching cell on the strain dispersion, by analyzing the response of specimen coupons placed in different heat treatment facilities.

Contact: alexandre.fleurentin@metallocorner.fr

COMPOSITION:

Aurelie ACHILLE (FAURECIA), Odile ALLEAUME (FUCHS LUBRIFIANTS FRANCE SA), Melinda BARRIERE (RENAULT), Marc BUVRON (CETIM), Claude BINGLER (SETFORGE), Simon CATTEAU (ASCOMETAL), Elsa CHESNOT (MOTUL), Stéphane CHOMER (THERMI-LYON) Julien DELGADO (CETIM),Jean-Luc DUPAIN (SAFRAN Landing Systems), Alexandre FLEURENTIN(METALLO CORNER - Commission leader), Eric FRADE (THERMO PROCESS), Hervé GALLIEN (JTEKT), Léo GAMAIN (ASCOMETAL), Emmanuel GRANDAME (HACER), Victor GUILLER (FUCHS), Patrick JACQUOT (BODYCOTE), Dominique KAUFFMANN (CONDAT LUBRIFIANTS), Didier LABROSSE (UGITECH), Rémi LADROUE (AUBERT & DUVAL), Gilles LEROY (AUBERT & DUVAL) Marie-Anne METAIS (ALD France), Mélanie MUCZKA (MOTUL), Remy NAPIERALA (HOUGHTON), Christian PARISOT (GEVELOT), Fabien PERRARD (NTN-SNR), Anna-Maria PUBILL-MELSIO (AIR LIQUIDE FRANCE INDUSTRIE), Pauline RATEL (NTN-SNR), Joël ROSTAING(LISI AUTOMOTIVE).

ALUMINIUM & STEEL surface treatment commission: facilitator Frédéric RAULIN

One of the objectives of the commission is an exchange of industrial, technical or scientific information between its members, which is concretized at each meeting by an important part in the agenda.

Another objective is to intervene in training establishments: Universities, professional high schools, IUT, engineering schools. It has been noted that surface treatments of light alloys are absent, or only briefly mentioned, in the curriculum of these establishments. It was therefore necessary to prepare an adapted training, intended to present:
* the heat treatments of light alloys
* the main treatments carried out on Al and Ti (chemical and electrolytic conversions)
* the safety, environment and quality issues
* the surface treatment professions

In 2014, a day was organized, on February 12, at the ENI in Tarbes with the participation of students from the Lycée Professionnel Jean Dupuy, a day that proved to be particularly rich and full of questions from the students. A second day was organized on October 14, at the Lycée MERMOZ in Saint Louis, with the participation of 70 people, and the honors of an article in the Dernières Nouvelles d'Alsace!

The third objective is to list and make known to the members of the association and more widely to the users of aluminium, the usable surface treatments and their characteristics, as well as their state of development, industrial or R&D. This information is made available in the form of electronic sheets available on the association's website:
. These sheets are short, A4 format, and simple. The target is a non-specialized public. The treatments described range from the most commonly used to the least known, from those that have been industrialized for many years to those that are under development.

This year has seen the revision of sheets on chromium anodizing, coloring, hexavalent chromium-free chemical conversions and surface treatment standards, and new sheets on TSA, painting technologies and pre-paint treatments.

The last objective is the organization of technical presentations, in front of the commission, by formulators, laboratories or organizations, on novelties interesting the profession. These presentations are then reported in "A3TS Sciences et Techniques".

Contact: f.raulin@a3ts.org

COMPOSITION:

Fabrice ANTOINE(ATOTECH), Médéric BAILLY (ATOTECH), Stéphanie BARBREL(DASSAULT AVIATION), Fabien BARELIER(AIRBUS HELICOPTERS), Jean-Louis BAUDOIN (ATOTECH), Sylvie BECHT (DOERKEN), Claude BRAULT(Materials Consultant), Gilles CHOLVY(NEXTER SYSTEMS), Marc COURTEAUX (PSA PEUGEOT CITROËN), Fernand DA COSTA (RENAULT), Frédéric DEZON (THYSSENKRUPP MATERIALS), Isabelle ECOTIERE(SURTEC), Denis FLECHE (SAFRAN) , Marie-Pierre GIGANDET (University of Franche-Comté), Jean-Yves HIHN (University of Franche-Comté), Virginie MOUTARLIER(University of Franche-Comté), Frédéric RAULIN (COVENTYA - Commission leader), Brice SOTTIL(COVENTYA), Philippe SPILERS (APS COATING SOLUTIONS), Joffrey TARDELLI (IRT M2P), Romaric TREZAIN (CHEMETALL), Cédric VASSEUR (MACDERMID)

Wear and tear commission: facilitator yVES gachon

Improving wear resistance and optimizing friction properties are the goals of many surface treatments and heat treatments. This is an essential concern for design offices and a way to progress in mechanics, automotive, aeronautics, energy ... A number of conventional solutions are then questioned. It is therefore necessary to look for sustainable solutions with respect to future regulations and to evaluate them from a tribological point of view. This evaluation requires tests, which are not standardized enough, making it difficult to compare each solution. It is therefore essential to have a range of tests covering a wide range of applications.

In order to reduce development time and to validate the integration of tribological parameters earlier in the design process, it is necessary to have a tool for modeling the mechanics of contacts.

Before being able to provide solutions to all these problems, it is important to take stock of what has already been achieved and to lay the foundations of the technique.

For this purpose, the Commission has set itself several objectives which will be, in the first instance, the drafting of documents in the form of a collection, review or technical bulletin:

  • To provide the industry with sources of information and expertise on the subject of "Friction - Wear".

  • List the different tests characterizing friction and wear

  • To extract combinations of tribological functionalities (friction, wear) from sensitive components and key positions in the aeronautics, automotive and energy sectors

  • Establish a matrix of the different solutions applied to meet these functionalities

  • Propose simple test methods to control the drift of the different production phases with respect to the tribological performance of coatings

to propose at regular intervals an event of restitution of the work and exchange with the community. (conference, publication...)

Contact : Yves Gachon - ygachon@hef.group

COMPOSITION:

Sophie BARRADAS (DASSAULT AVIATION), Sylvain BATBEDAT (BODYCOTE), Houcine BEN ABDELOUNIS (TRIBOLOGY & MATERIALS FOR INDUSTRY), Aude BERTINOTTI (SAFRAN LANDING SYSTEM), Vincent BRANGER (NAVAL GROUP), Pierre-François CARDEY (CETIM) Pierre CHARLES (STELLANTIS), Yan Ming CHEN (CETIM), Fernand DA COSTA (RENAULT), Alexandre DAVID (WINOA), Axel DE LAVERNHE (WINOA), Karim DEMMOU (SAFRAN AICRAFT ENGINE), David DUBLANCHE (BODYCOTE), Franck DERANGERE (IONBOND) Moussa DIABY (INSTITUT NATIONAL POLYTECHNIQUE DE YAMOUSSOUKRO), Alexandre Fleurentin (METALLO CORNER), Yves GACHON (HEF IREIS - Commission leader), Astrid GIES (OERLIKON), Philippe KAPSA (LTDS), Sophie LUBIN (COLLINS AEROSPACE), Adrien MAGNEE (UL), Eric MALES (OERLIKON), Frédéric MEUNIER (OERLIKON BALZERS FRANCE), Mathilde MILLOT (SAFRAN TECH), Cédric POUPON (AIRBUS), Julian ROLLAND (RICHEMONT), Nathalie SERRES (SAFRAN AIRCRAFT ENGINES), Philippe SPILERS (APS), Philippe WARTER (HAUCK HEAT TREATMENT)