a3ts 2022 Congress - nantes
Opening of the Congress. Opening of A3TS Congress.
Véronique VITRY (President A3TS)
Presentation of the " EMC2 " cluster. "EMC2" presentation.
LaurentMANACH (EMC2 Cluster)
Zero emission aircraft: technological challenges. Zero emission aircraft: technological challenges.
Loïc BUFFET, Alban SALKIN (ZERO EMISSION DEVELOPMENT CENTER - AIRBUS)
Production of carbon-free hydrogen: materials challenges in electrolysers. Production of carbon-free hydrogen: materials challenges in electrolysers.
Bruno POLLET (UNIVERSITY OF QUEBEC)
Developments in heat treatment. Highlights of ECHT2021 and HK2021. Heat Treatment trends - Highlights of HK 2021 and ECHT 2021.
Marc BUVRON (CETIM)
"Infl uence of total pressure, nitriding potential on growth kinetics of combination layer during reduced pressure nitriding (400 mbar). Infl uence of pressure and nitriding index on growth kinetics of combination layer during reduced pressure nitriding process (400 mb)".
RaphaëlMARIN (IRT M2P)
Influence of nitrogen enrichment on microstructure and mechanical properties of 27MnCr5 steel. Influence of nitrogen enrichment on microstructure and mechanical properties of 27MnCr5 steel.
Maria-Rita CHINI, Pascal LAMESLE (IRT M2P)
Silver layers for connectors dedicated for Electrical vehicules. Silver layers for connectors dedicated for Electrical vehicules.
Sebastien FOURGEOT (UMICORE)
Kinetics control of hard silver bath for connectivity. Kinetics control of hard silver bath for connectivity.
Xavier WEBER (THERMOCOMPACT), Jean-Yves HIHN (UTINAM)
Electrical connections with very low resistivities for battery packs. Connections for battery packs with very low resistivities.
DavidMERCS (LISI Automotive)
Porous films development for power modules assembling by thermocompression. Porous films development for power modules assembling by thermocompression.
Jonathan SCHOENLEBER (UTINAM - SIMAP)
ECU (Energy Control Unit) and battery packs treatment with SurTec 650. ECUs (Energy Control Units) and batteries packs treatment with SurTec 650.
Isabelle ECOTIERE (SURTEC)
Non-destructive testing of the hardness of mass-produced parts with Multiple Frequency Magnetic Test Method. Hardness Testing of Heat-Treated Mass Parts with Multiple Frequency Magnetic Test Method.
Arnold HORSCH (Arnold HORSCH e.K.)
Evaluation of residual stresses. Residual stress measurement.
Eric USMIAL (CETIM)
Effect of operating conditions on nucleation of zinc and zinc alloy electrodeposits in acid environment. Influence of operating conditions on nucleation of Zn and ZN alloys electrodeposits in acid environment.
Charles PETIT (VALLOUREC)
Hydrogen sensibility of high Fe-content Zn-Fe electrolytic process. Hydrogen sensibility of high Fe-content ZnFe electrolytic process.
Romain LEBARBANCHON (LaSie)
Shot peening reinforcement influence on carbonitrided 27MnCr5 steel. Shot peening reinforcement influence on carbonitrided 27MnCr5 steel.
Maria-Rita CHINI, Pascal LAMESLE (IRT M2P)
Low-pressure carburizing : proposal of " optimized " receipt after experimental validation on industrial furnace. Low-pressure carburizing : proposal of " optimized " receipt after experimental validation on industrial furnace.
Fatima MATAMOROS, Hubert MONNIER (INRS)
Quenching and partitioning - Application to forging parts. Quenching and partitioning - Application to forging parts.
Christophe STOCKY (ABS)
Application laser pickling and surface preparation for electrical conductivity on automotive and aeronautic parts.
Laser pickling and surface preparation for electrical conductivity on automotive and aeronautic parts.
Jean DUCHAZEAUBENEIX (IMELIAD)
Innovative cold spray and laser welding association for printed circuits fabrication dedicated to power electronics: final results of CLAPE project.
Innovative Cold Spray and laser welding association for printed circuits fabrication dedicated to power electronics : final results of CLAPE project.
Emilie AUBIGNAT (OUEST COATING)
PVD treatment for bipolar plates. PVD treatment for bipolar plates.
Anthony CHAVANNE (HEF)
Polymer coating, underestimated tribological enhancement of contact surfaces. Polymer coating, underestimated tribological enhancement of contact surfaces.
Gilles CASTAN (GGB BEARINGS)
How MMP Technology can optimize tribological characteristics through physical change of roughness. How MMP technology can optimize tribological characteristics through physical change of roughness.
Frédéric BAJARD (BINC INDUSTRIE)
Improvement of tribological properties of titanium alloys with Tinitron treatment. Improvement of tribological properties of titanium alloys with Tinitron treatment.
Patrick JACQUOT (BODYCOTE)
Femtosecond laser applications for tribological interface improvements: contact, friction, wear effects. Femtosecond laser application for tribological interface improvements : contacts, friction, wear effects.
Jean-Michel DUCHAZEAUBENEIX (MELIAD)
Influence of PVD process parameters on coatings properties. Influence of PVD process parameters on coatingsproperties.
Pierre COLLIGNON (PD2i)
Heat treatment for hot stamping tools. Treatment of Hot Stamping Tools.
Jens WILZER (DORRENBERG)
PVD coatings to protect polymer-based composites against particle erosion. PVD coatings to protect polymer-based composites against solid particle erosion.
Nicolas RANGER (OERLIKON)
Salt bath nitriding: an alternative technology for Chrome VI. Salt bath nitriding : alternative technology for Chrome VI.
Luc HERRMANN (HEF)
Thermal Spray Coatings on Organic Matrix Composite: what technological locks to overcome to meet the challenges of aeronautical applications?
Sophie SENANI (SAFRANTECH)
Metallic coatings on organic matrix composite for anti-ligthing application. Metallic coatings on organic matrix composite for anti-ligthning application.
Daniel BERNARD (TCPP)
Easy-to-clean non-stick coatings as anti-fouling solution for laminar flow preservation and CO2 emission reduction. Easy-to-clean non-stick coatings as anti-fouling solution for laminar flow preservation and CO2 emission reduction.
Mireille POELMANN (MATERIA NOVA)
Prediction method of chipping risk of sub-layers during RCF : application to a nitrided steel grade. Prediction method of chipping risk of sub-layers during RCF / Rolling Contact Fatigue.
Damien HERISSON (SAFRANTECH)
How can digital twins bring benefits to surface finishing process industries ? How digital twins can bring benefits to surface finishing process industries ?
Baptiste FEDI (BE2SIM)
Use of life cycle assessment for environmental relevancy evaluation of new surface treatement processes. Life cycle assessment implementation for environmental relevancy evaluation for new surface treatement processes.
Gaël FICK (IRT M2P)
Sustainable development and surface engineering, from chemicals to femtosecond laser Development and surface engineering, from chemicals to femtosecond laser.
Bertrand NICOLET (HEF-IREIS)
Sustainability 2.0: zinc flake systems curing at room temperature reduce the carbon footprint Sustainability 2.0: zinc flake systems curing at room temperature reduce the carbon footprint.
Sylvie BECHT (DOERKEN)
Industrial gases and the carbon footprint of thermal treatments: solutions to reduce the greenhouse effect. The case of hot isostatic compression (CIC). Industrial gases and carbon footprint of heat treatment process: solutions for reducing the global warming impact. Case study of Hot Isostatic Pressing (HIP).
Lucas BUSTAMANTE-VALENCIA (AIR LIQUIDE)
INEOSIL: optimized sealing of anodic layers. INEOSIL: optimized sealing of anodic layers.
Marion BALSARIN (GIT), Jerôme FRAYRET (INEOSURF)
Micro arc oxidation on aluminum: elaboration, characterisation and tribological properties of various surface conditions; comparison with hard anodic oxidation. Micro arc oxidation on aluminum : elaboration, characterisation and tribological properties of various surface conditions; comparison with hard anodic oxidation.
Louis RODRIGUEZ (GIT)
In-depth incorporation of carbon nanotubes in aluminum layers made by micro-arc oxidation. In-depth incorporation of carbon nanotubes in aluminum layers made by micro arc oxidation.
Corentin DA SILVA TOUSCH (UNIVERSITY OF LORRAINE)
Tin-assisted electrocolouring of anodic layers on Al 1050 : impact of barrier layer thickness. Tin-assisted electrocolouring of anodic layers on Al 1050 : influence of barrier layer thickness.
Jeremy DAVAL (AALBERTS ST), Emmanuelle BRUNOL (UTINAM)