In 2013, the A3TS organized ten events: seven regional technical seminars, the 41st Congress in Marseille (500 participants), the CIMATTS symposium in Nancy, and the 3rd International Conference on the Processing of Light Alloys in Le Bourget.
Key Figures
12
events
800
Participants in the SVTM Conference and Trade Show in Reims
95
companies exhibiting in Reims
1
New regional office: Limousin
The Year at a Glance
- Feb. 7 · Paris – Thin-layer surface hardening
- Feb. 20 · Bourges – Surface Treatments
- Feb. 20 · Limoges – A3TS Open House
- March 20 · Maubeuge – Wet-process anti-corrosion and anti-wear treatments
- March 27 · Nancy – Materials, Research, and Processes
- April 3 · Reims – Heat Treatment of Stainless Steels
- April 10 · Saint-Louis – Nitriding and Nitrocarburizing
- April 10 · Saint-Étienne – Hot Forging in 2014
- April 25 · Saint-Étienne – Regulations and the Environment
- June 11–12 · Reims – 42nd A3TS and SVTM Congress 2014
- Nov. 24–28 · Montpellier – Materials 2014
- Dec. 10–11 · Pau – Applications and Innovations in Thermal Spraying
February 7 · Surface Hardening of Metal Alloys Using Thin Films: Current Industrial Solutions and Future Prospects
REGIONAL DAY · ÎLE-DE-FRANCE
Diderot Technical High School, Paris · preceded by the A3TS General Assembly
Key figure: more than 100 participants
With treatments and coatings just a few microns thick, they provide hardness, anti-seizing properties, and low friction: state-of-the-art thin-film technology, ranging from wet deposition to vacuum deposition and thermal spraying.
-
The Benefits of Hard Coatings for Tribological Applications – P. Kapsa (École Centrale de Lyon)
Mechanical Properties of Thin Films by Nanoindentation – D. Chicot (University of Lille 1)
New Trends in Metal Surface Treatment – T. Czerwiec (University of Lorraine)
Electrolytic nickel: Properties of boron- and phosphorus-containing deposits – V. Vitry (University of Mons)
Wet-process hard coatings, electroless nickel plating – S. Méry (Coventya)
Recent Developments in PVD, CVD, and Plasma Spray Thin Films – F. Meunier, M. Gindrat (Sulzer)
Thin Deposits by Thermal Spraying of Solutions and Suspensions – L. Pawlowski (University of Limoges)
Ion Implantation on Metal and Polymer Parts – Y. Corre (Bodycote-Nitruvid)
High-Energy Beams in Coatings and Heat Treatment – Mr. Ducos (consultant)
February 20 · Surface Treatments
REGIONAL DAY · WEST, CENTRAL BRANCH
Bourges University Institute of Technology (IUT) · Afternoon Classes
Key figure: 35 participants
A half-day event for local small and medium-sized businesses to learn about the surface treatments available for steel, aluminum, and stainless steel, as well as the impact of REACH.
-
Steel surface treatment: manganese-zinc-iron phosphating, burnishing – G. Cholvy
Steel Coatings: Chemical Nickel, Zinc-Nickel, Hard Chrome Plating, Galvanizing, Cataphoresis… – G. Cholvy
Aluminum Finishing: Satin Finishing, Pickling, Anodizing, Chromate Conversion – A. Mauduit
Buffer Treatments – C. Jeanton
Stainless Steel Processing, Passivation – R. Michel (Dalle / MR Ott)
The REACH Regulation and Its Impacts: Chromium VI – G. Cholvy
February 20 · A3TS Open House in Limoges
DISCOVERY DAY · LIMOUSIN
ENSIL, Ester Technopole, Limoges · in partnership with Sulzer Sorevi, Bodycote Ambazac, and ENSIL
Key figure: about 50 participants, mostly manufacturers from the region
A late-afternoon event to introduce the association to business leaders in the Limousin region, featuring two presentations and a cocktail reception. Its success led to the creation of the A3TS Limousin chapter, led by Frédéric Meunier.
-
Introduction to the A3TS – Pierre Bruchet, President
Heat Treatments and Surface Treatments: Solutions for Performance Optimization – Claude Leroux, Honorary President
State of the Art in Industrial Surface Coatings – Régis Aumâitre (CITRA)
Panel discussion moderated by Frédéric Meunier (Sulzer Sorevi), followed by a cocktail reception
March 20 · Wet-process surface treatments for corrosion and wear protection
REGIONAL DAY · NORTHERN FRANCE – BELGIUM
Maubeuge University Campus
Key figure: 31 participants
Chemical nickel plating, green zinc plating, ceramic sol-gels: wet processes in response to HSE requirements and the phase-out of hexavalent chromium, and their characterization techniques.
-
Program · 8 presentations and a panel discussion
Liquid-Phase Surface Treatments: History and Principles – V. Vitry (Polytech Mons)
Chemical Nickel Plating: Processes, Applications, Recent Developments – M. Decker (Kanigen)
Electrolytic Nickel Plating: Market and Technologies in 2014 – G. Lejeune (MacDermid France)
Toughness of Ni-P Coatings – Prof. D. Chicot (University of Lille 1)
Tribology of Electroless Nickel Coatings – Prof. M. H. Staia (Arts et Métiers ParisTech Lille)
Green Galvanizing: Applications – H. Wathelet (Yvens-Decroupet)
Sol-Gel Deposits of Composite Ceramics for Tribological Applications – J. Martegoutte (University of Valenciennes)
HSE, REACH, Regulatory Requirements – S. Abdesslam (Cetim)
March 27 · Materials, Research, and Processes: Solutions for Reducing Costs and Design Time
NATIONAL DAY · WITH EEIGM AND THE MATERALIA CLUSTER
European School of Materials Engineering (EEIGM), Nancy
Key figure: about 50 participants, including industry representatives and academics
Numerical Simulation and Modeling for Materials and Their Processing: Bridging the Gap Between Laboratories That Develop Models and Manufacturers That Apply Them. This one-day event replaced the CIMATTS conference originally scheduled for November 2013.
-
Manufacturers: Sintertech, PSA, Bodycote, Faurecia, MECS, Cetim, Arcelor, Renault
Research: Jean Lamour Institute, ENSEM, EEIGM, Insic Cirtes
Topics: cold forming, casting, heat treatment, shot peening, metal coatings, automotive weight reduction, corrosion, thin films
April 3 · Heat Treatment of Stainless Steels
REGIONAL DAY · NORTHEAST
Franklin-Roosevelt High School, Reims
Production processes and major categories of stainless steel, vacuum heat treatments, and practical examples involving forged parts, followed by a tour of the workshops in the high school’s BTS programs—France’s leading training center for these trades.
-
The Production of Stainless Steels, Major Categories, and Applications – Lionel Barrachin (Aubert & Duval)
Heat Treatment of Stainless Steels: Standards, Vacuum Furnaces, Case Studies – Rémy Houth (Bodycote)
Forging and Heat Treatment of Stainless Steel Parts – Charly Gascard (Gascard Martin-Prost Estampage)
Tour of the high school's BTS Heat Treatment and Surface Treatment workshops
April 10 · Nitriding and Nitrocarburizing
REGIONAL DAY · EAST ALSACE
Jean-Mermoz Technical High School, Saint-Louis (Haut-Rhin) · Free for students
From salt-bath nitriding to active-screen ion nitriding: the history, fundamentals, and industrial processes of a rapidly growing technology, followed by a tour of the Materials Processing BTS laboratories.
-
History of Nitriding – Mr. Martin (A3TS)
Basics of Nitriding – Ph. Warter (Metatherm)
Gas Nitriding and Nitrocarburizing Systems: Application Examples – D. Zimmermann (Codere)
Ion Nitriding with an Active Shield – A. Mulot (MTC)
Nitrocarburizing of Precision Parts – S. Lachhab (Listemann)
In-Situ Monitoring and Control of Nitriding Atmospheres – G. Crevoiserat (SCR Crevoiserat)
Tour of the Materials Processing BTS Laboratories
April 10 · Hot forging in 2014: An Essential Tool for Shaping High-Performance Alloys
PARTNERSHIP · METAL STUDY GROUP AND SF2M SOUTHEAST
École des Mines, Espace Fauriel, Saint-Étienne
Organized in collaboration with the Cercle d'études des métaux and the Southeast Chapter of the SF2M, the event showcased the latest advances in hot forging of components for the aerospace, defense, nuclear, and oil industries: steel, aluminum, nickel, titanium, and zirconium.
-
Manufacturers: Aubert & Duval, Industeel (ArcelorMittal), Areva Cezus, Areva Creusot Forge, Timet, Cetim
Research: École des Mines de Saint-Étienne, CEMEF, ENSAM Metz
Topics: microstructure prediction, superalloys, aluminum and titanium alloys, zirconium, simulation and optimization of forging processes
April 25 · Regulations and the Environment: Current Technical Solutions
REGIONAL DAY · SOUTHEAST
Benoît-Fourneyron High School, Saint-Étienne
How surface treatments are adapting to environmental regulations: dry cleaning, developments in wet cleaning, and new steel grades.
-
Stainless Steels in the Aerospace Industry, Ready-to-Use Tool Steels – Lionel Barrachin (Aubert & Duval)
An Overview of Innovative Dry Cleaning Techniques – Jacques Jay (Cetim)
Wet Surface Treatments: What the Future Holds – Frédéric Raulin (Coventya)
Surface Treatments and Environmental Regulations: A Past with a Promising Future – Gilles Cholvy (Nexter)
June 11–12 · 2014 A3TS Conference and SVTM Trade Show: Materials Processing, New Challenges, New Performance Levels
FLAGSHIP EVENT · 42nd NATIONAL CONGRESS
Convention Center, Reims · in partnership with the SFV and the Materalia cluster · factory tours on June 13
Key Figures:
806 participants · 95 exhibiting companies · 25 conferences · 23 forum presentations
Following on from Marseille 2013, the conference addressed the extreme operating conditions for material-processing combinations. The SVTM trade show, organized in collaboration with the French Vacuum Society (SFV), brought together 270 conference attendees, 166 exhibitors, 250 visitors, and 120 participants in the SFV conference.
-
The Metallurgical Industry in France: Strategy and Structure – J.-H. Schmitt (École Centrale de Paris)
Recent Innovations in Steels and Superalloys – H. Schaff (Aubert & Duval)
The Evolution of Automotive Seats Over the Past 30 Years: Weight Reduction and Enhanced Safety Through Heat Treatment – V. Woimbee, A. Achille (Faurecia)
-
Improving the mechanical properties of materials: simulation (SMP, IRT M2P), springs (Sogefi), bearings (SNR, Creas-Ascometal), induction (PSA, Tata Steel), additive manufacturing (IFTS), aerospace (Astrium), HN carbonitriding, titanium (Messier-Dowty), DLC (Cetim)
How regulations will change surface treatments: nickel and REACH (Nickel Institute, Cetim); substitution of chromium VI and cadmium (PSA, Snecma, Radiall); the IZAC project (Lisi Automotive, University of Franche-Comté); chromium VI-free metal plating on plastics (Atotech, Coventya); IRT M2P. Opening segment: the restoration of the chandeliers at Reims Cathedral.
-
2014 SVTM Innovation Award: Rübig in the Materials Processing category (hard and thin coatings deposited inside a 15-mm tube), Neyco in the Vacuum category
A3TS Gala: More than 220 guests at the Palais du Tau, next to the cathedral. Honorary President’s Medals were presented to Christian Tournier and Michel Siaut.
Tours on June 13, 70 participants: Le Bronze Industriel (Suippes), ArcelorMittal (Reims), SGI (Villers-Cotterêts), Franklin-Roosevelt High School (Reims)
4 winners from the participating high schools
An overall score of 3.3 out of 4 on the satisfaction survey, and 3.7 for the choice of Reims
November 24–28 · Materials 2014
PARTNERSHIP · FRENCH MATERIALS FEDERATION
Le Corum, Montpellier · 4th edition
The A3TS was one of the academic societies organizing this French-language conference on materials, held under the auspices of the French Materials Federation, which featured an exhibition of 80 exhibits open to the public free of charge.
December 10–11 · Applications and Innovations in Thermal Spraying
INTERNATIONAL CONFERENCE · SOUTHWEST
Palais Beaumont, Pau · 4th edition
Key figures: 21 presentations · 5 sessions · an overall rating of 3.4 out of 4 on the satisfaction survey
Laser cladding, slurry spraying, cold spray, industrial equipment, and applications: The 4th edition provided an overview of the latest developments in the field, with a dedicated space for business networking during breaks. The presentations were recorded.
-
Plenary Session: Thermal Spraying at Bodycote – David Dublanche (Bodycote)
Laser cladding: Oerlikon Metco, Maurice Ducos (consultant), AG Tôlerie
Suspension Testing: SPCTS-Unilim, CEA, Turbomeca, Unilim, Cirimat
Cold spray: ParisTech, TCPP, Linde, APS Coatings Solutions, Air Liquide, and Mallard
Equipment and materials: H.C. Starck, Camfil, TAV
Industrial Applications: Messier-Bugatti-Dowty, Saint-Gobain, Praxair, Liebherr Aerospace
The discussions continued during a tasting dinner at the Cinquau estate, in the Jurançon vineyards.